CellarPro 1800H Houdini Duct KIT COLD SIDE (P/N 35619). These duct kits are designed for use with CellarPro's 1800H Houdini cooling unit, as follows:
- Attach to the cold side airflows (intake and exhaust), allowing the cooling unit to be located remotely (ie away from the cellar), as follows:
- Cold air return: must be ducted from the left side (as shown)
- Cold air exhaust: must be ducted from the front (as shown)
Each bundle includes:
- 2 hoods (1 for intake and 1 for exhaust on the cold side)
- 1 Bottle probe
- 2 insulated flex ducts (25' each)
Please note:
- Ducting must be 6-inch diameter or equivalent from start to finish
- If the control panel will not be conveniently accessible, we recommend adding our remote display/control unit #1603 (sold separately)
- If you want ducting on BOTH the cold side and the hot side, you will need to purchase the hot-side kit
- The high fan speed MUST be used when ducting our cooling unit.
The maximum length of ducting is 50 equivalent feet on the hot side and 50 equivalent feet on the cold side. The hot side can be ducted up to 100 equivalent feet with the addition of an inline duct fan (sold as a separate kit.)
