Overview
DuraPlus is designed to stay cool on the outside, to provide a hot draft on the inside, to boost stove efficiency, and provide a fire-safe design that protects both the chimney and the building. This triple-wall chimney features two insulating layers (refractory blanket, plus air space). The refractory insulation is held securely in position, eliminating hot spots common with loose-fill type insulations. In the event of a creosote fire, the compressible blanket insulation permits the chimney liner to expand outwardly in a radial direction
Designed for normal, continuous operation at 1000° F flue gas temperatures, DuraPlus is subjected to rigorous and stringent HT requirements of the UL standard, including one hour at 1400° F, plus three ten-minute chimney fire tests at 2100° F.
Features
- Can be used for flat or vaulted ceiling installations.
- Use for typical through-the-roof installations.
- Only available in 6” diameter.
- Pipe not included.
Includes:
| DVL/DuraBlack Chimney Adapter |
|
Use to connect from double-wall DVL and/or single-wall DuraBlack to DuraTech, DuraPlus, and DuraLiner for a through-the-wall or ceiling support installation. Required for proper connection. |
| DuraBlack Snap-Lock Adapter w/ Trim |
|
Connects into the ceiling support box or finishing collar and extends down to fit into the stovepipe for a drip-free connection to a DuraTech, DuraPlus, or DuraLiner Chimney system. |
Square Ceiling Support Box w/ Trim
|
|
Use with flat, vaulted, or cathedral ceilings. The Square Ceiling Support Box is painted black. |
| Adjustable Roof Flashing 0/12-6/12 |
|
Use to weatherproof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on the pitch of the roof. |
| Chimney Cap |
|
Use to weatherproof the penetration of chimney pipe through the roof. Storm Collar required. Select roof flashing based on the pitch of the roof. |
| Storm Collar |
|
Seal the inner edge of the collar to the chimney pipe with non-hardening 500°F high-temperature sealant. |
| Attic Insulation Shield |
|
Required for installations that pass through an attic to prevent insulation and debris from accumulating near the chimney. Fits over Firestop Radiation Shield or a support box. Consists of two parts: a collar and a base. |
Specifications
| Model |
6DP-KBSC |
| Diameter |
6"
|
| Clearances |
2" clearance to combustible. |
| Listings |
UL Listed to UL 103HT (MH7399). |
| Warranty |
Limited-lifetime warranty |
Downloads
Warning: This product can expose you to Chromium, which is known in the state of California to cause cancer, congenital disabilities, or other reproductive harm. For more information, see CA Prop 65 Warning
