This Kegco ICXCK-1B-4 Four Faucet Commercial Javarator is a great choice for any coffee shop or small restaurant that wants to start dispensing a wide variety of cold brewed coffees straight from a keg! The interior is large enough to store and dispense from up to four 5 gallon kegs at the same time, allowing you to offer your customers a variety of iced coffee flavors. The kegerator features a knockout that allows you to place your nitrogen tank outside of the unit, leaving you more room inside for kegs!
4" locking casters make this cold-brew coffee dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your iced coffee stays cold all the way up to the faucet.
Highlights:
- Designed for the unique requirements of dispensing iced coffee on tap from up to four coffee kegs at the same time
- Four tap dispense system consists of stainless steel and food grade plastic to ensure cleanliness
- Rugged steel construction with stainless steel top and built-in drip tray that collects spills
- Can hold two quarter slim kegs or up to four 5 gallon kegs with external nitrogen tank
- ETL and ETL Sanitation Listed and NSF Compliant for commercial use
Features:
-
Includes a brand new aluminum 15 cu. ft. Nitrogen Tank with Sleek Black Epoxy Finish
This tank is produced from high strength, corrosion-resistant aluminum alloy 6061-T6. The eye-catching sleek black epoxy finish acts as an extra layer of protection against corrosion and wear, and the aluminum construction is lighter weight than steel tanks and does not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. (5.5" diameter, 18.25" Height).
-
Includes a Commercial Grade Dual Gauge Nitrogen Regulator with 4-Way Air Distributor
This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components. This regulator features an integral safety pressure relief valve that releases at 45 PSI and comes with a 4-way air distributor.
-
Includes four 5 foot lengths of 5/16" I.D. Air Line Assembly with 2 Snap Clamps each
Four standard 5 foot lengths of 5/16" I.D. Blue Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design.
-
Includes four sets of Ball Lock Home Brew Keg Couplers
Each set includes both a gas in and a beer out coupler that work with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
-
Includes a T-Style Polished Stainless Steel Four Faucet Draft Tower
This NSF-approved tower is a 3" diameter four faucet metal draft tower made of polished stainless steel. It features 100% stainless steel contact for good sanitation. This tower comes complete with stainless steel faucets and four 5 foot lengths of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucets can be upgraded to Perlick faucets, which have less internal surface area to prevent the faucet knobs from sticking.
-
Keg Storage Capacities:
- One (1) Full Size / 1/2-Barrel (15.5 Gal.)
- One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
- Two (2) 1/4-Barrel Slim (7.75 Gal.) or
- Four (4) 1/6-Barrel (5.23 Gal.)
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Continuous cold air channeled through tower to ensure cold product
- Heavy-duty stainless steel top
- Built-in drip tray with drain
- Stainless steel interior walls and ceiling
- Rubber Floor Mat prevents damage to interior
- Magnetic gasket provides positive door sealing
- Self-closing door with lock
- Refrigeration system utilizes ozone-friendly R134a refrigerant
- CFC-free foamed-in-place polyurethane insulation
- Knockout for remote nitrogen tank
- Black finish
- ETL and ETL Sanitation Listed for Commercial Use
Specifications:
| Dimensions |
| Height |
40" (top of guard rail) |
| Width |
23.5" |
| Depth |
31" |
| Warranty |
| Labor |
1 Year |
| Parts |
1 Year |
| Compressor (Parts Only) |
5 Years |
| Key Features |
| Built-in Capable |
No |
| Security Lock |
Yes |
| Keg Coupler |
Ball Lock |
| Regulator |
Dual Gauge |
| CO2 Tank |
5 lb. |
| Cleaning Kit |
Not Included |
| Outdoor Use |
No |
| Commercial Use |
Yes
|
| Keg Storage Capacities |
| Full Size / 1/2-Barrel |
1 |
| Pony Size / 1/4-Barrel |
1 |
| 1/4-Barrel Slim |
2 |
| 1/6-Barrel |
3 (4 with external nitrogen tank) |
| 5 gal. Ball/Pin Lock Keg |
3 (4 with external nitrogen tank) |
| Exterior |
| Cabinet |
Black |
| Drip Tray |
Yes |
| Guard Rail |
Yes |
| Casters |
Yes |
| Draft Beer Tower |
| Number of Faucets |
3 |
| Material |
Stainless Steel |
| Diameter |
3" |
| Door |
| Color / Material |
Black |
| Number of Doors |
1 |
| Door Handle |
Recessed |
| Field Reversible |
No |
| Accepts Custom Overlay Panel |
No |
| Cooling System |
| Type |
Compressor |
| Defrost System |
Automatic |
| Front Ventilation |
No |
| Controls |
| Adjustable Thermostat |
Yes |
| Digital |
No |
| Electrical |
| Electrical Requirements |
115 V / 60 Hz |
| Running Amps |
1.8 A |
