Kegco 24" Wide Dual Tap All Stainless Steel Outdoor Built-In Right Hinge Kegerator with Kit - HK38SSU-2

Your pool parties and BBQ's will never be the same thanks to the Kegco HK38SSU-2 Digital Outdoor Undercounter Kegerator, the very best two-product keg dispenser on the market for your backyard or patio. Featuring a versatile design that can be used built-in or freestanding and a durable stainless steel exterior that has been designed to withstand the elements, it comes complete with a fully equipped draft dispense system that takes the guesswork out of keg dispensing. At 3200 BTUs, it utilizes the most powerful compressor in its class to deliver unprecedented cooling for faster recovery and temperature pulldown, and the wide 32-59 degree temperature range makes it suitable for serving cold beer, coffee, kombucha, and even wine!

A premium kegerator should have only the highest quality components, so Kegco has included a premium direct draw kit with the HK38SSU-2 that has been specially designed to give you the most convenient and reliable draft beer parts at an unbeatable value.

Highlights:

• Premium dispense components include 100% Stainless Steel Beer Contact, Premium Double Gauge Regulator, Corrosion-resistant Electric Red CO2 Tank and Hand Pump Pressurized Cleaning Kit
• Outdoor kegerator can be built in undercounter to provide a seamless look to your backyard BBQ island or outdoor kitchen
• Utilizes forced air refrigeration and an air-cooled draft tower to ensure even cooling throughout the cabinet and ice cold beer with every pour
• At 3200 BTUs, it has a commercial grade compressor that is the most powerful in its class, providing unprecedented cooling for fast recovery and temperature pulldown
• The 32-59 degree Fahrenheit temperature range is the widest on the market and makes it versatile enough to serve ice cold beer or dispense wine

Features:

• Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 valves are CGA approved, and have a male thread for CO₂ regulators. An average fill is good for 5-6 kegs depending upon your fill.
• Includes Premium Double Gauge CO₂ Regulator with Air Splitter
  This two product regulator works with any CO₂ tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO₂ is inside of the kegs. The side gauge measures the remaining volume of CO₂ in the tank, so you'll know when it's about time to get the tank filled. This regulator has an air splitter with two shut-off valves to deliver CO₂ to one or two kegs at the same pressure, and features a large hand control that makes it easy to adjust the pressure inside of the keg.
• Includes two 5 foot lengths of 5/16" I.D. Blue Air Line Assembly with 4 Plastic Snap Clamps
  This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assemblies come with two plastic snap clamps with a reusable clamp design.
• Includes two D system lever handle keg couplers that can tap all domestic kegs
  These commercial grade lever handle keg couplers work with all American "D" system Sankey kegs. They feature 55-psi pressure relief valves and nickel-plated forged brass bodies. To tap a keg, simply pull out and then down on the lever handle.
• Includes a 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
  This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included.
• All dispensing accessories are UL recognized components
• Converts into a refrigerator using 2 full-width shelves that can be adjusted in 1/2" increments
• Large enough to hold most full size kegs, including Coors and Miller. Interior height is a limitation, so kegs that are taller than the standard half barrel (23.25") may not fit with the keg coupler installed. We have run into this issue with certain German kegs along with the M system coupler, but most major brands in D and S System kegs will not be an issue.
• Holds (1) full-size keg, (2) quarter slim kegs), (3) 5 gallon commercial kegs, or (3) 5 gallon home brew kegs
• PLEASE NOTE: Will not hold 50L European kegs
• Maximum Ambient Temperature: 100 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the ambient temperature.
• Durable all stainless steel exterior makes it suitable for outdoor use
• A perfect option for dispensing beer, soda, kombucha, wine or cold brew coffee
• Stainless steel guard rail helps prevent mugs and glasses from sliding off
• Stainless steel interior is more durable than the plastic liner found in most kegerators
• Plugs into standard home outlet

Built-in Or Freestanding Use

The front-venting design allows you to build this kegerator into cabinetry for a seamless look that is easy to maintain and provides more floor space. A stainless steel guard rail is included to prevent glasses or mugs from sliding off the top in freestanding applications.

Digital Temperature Display

Easily adjust and view the set temperature, toggle between Celsius and Fahrenheit, or turn the interior light on and off with the push of a button. The controls can be accessed effortlessly at the front of the cabinet, out of the way of the dispense system.

Stainless Steel Interior

The beautiful stainless steel interior is more durable than the plastic liner found in many competing models and easy to clean. Enough floor space is provided to house a full size keg, two quarter slim kegs or up to three 5 gallon kegs for a variety of configurations. PLEASE NOTE: Will not hold 50L European kegs.

Converts to a Refrigerator

Two adjustable wire shelves are included, allowing you to convert these beer dispensers into refrigerators when you are in need to extra cold storage. Shelf adjustment is easily done in 1/2" increments so you can space them according to your needs.

Locking Stainless Steel Door

The attractive stainless steel door includes a lock to keep the contents secure. Both a towel bar and a curved handle are provided, so you can choose which option best matches your furnishings. A door alarm will sound if the door is left open too long.

Air Cooled Tower Prevents Foam

Forced air refrigeration ensures that cold air is evenly distributed throughout the cabinet so there are no hot spots. Cold air is directed into the beer tower, ensuring that the lines are cool all the way up to the faucet so there's less foam between pours.

User Manual