The Kegco HBK1XB-1 Home Brew Kegerator is equally suitable for use in a trendy bar or in your very own man cave. This commercial grade keg beer cooler is durably built to withstand the abuse of retail environments like a restaurant or tasting room but small and portable enough to easily move it from place to place. It is ETL and ETL Sanitation Listed and NSF Compliant, ensuring that it has met the requirements of widely accepted product safety standards for draft beer dispensers. The HBK1XB-1 comes complete with all the components necessary to serve your own home brewed beer from a ball lock keg and features a polished stainless steel draft tower, a Commercial Grade Double Gauge CO2 Regulator and an aluminum 5 lb CO2 tank with a corrosion resistant glossy red coating - a $25 value at no additional charge!
4" locking casters make this beer dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your beer is cold all the way up to the faucet. It comes with an air-cooled 3" diameter draft tower, so if your direct draw will be provided by your beer distributor, you're all set. Beverage Factory offers the ability to add a custom draft system with our top quality selection of regulators, couplers and fittings. See the available options below and feel free to contact our expert staff with any questions you may have.
Highlights:
- Industrial-strength cabinet can withstand punishment in restaurants, pubs, tasting rooms or your home!
- This beer dispenser has a pre-configured direct draw kit that includes everything you need to dispense two home brew ball lock kegs
- Fan-Forced Cooling provides rapid cool down and a blower hose directs cool air into the tower to keep the beer line cold all the way up to the faucet
- Built-in drip tray channels runoff into a drain receptacle inside the unit for quick and convenient clean up
- ETL and ETL Sanitation Listed and NSF Compliant for commercial use
Features:
-
Includes a brand new 5 lb. Aluminum CO2 Tank with Electric Red Epoxy Finish
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
-
Includes Commercial Grade Double Gauge CO2 Regulator
This regulator works with any CO2 tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO2 pressure is inside of the keg. The side gauge measures the remaining volume of CO2 in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver.
-
Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Worm Drive Clamps
This 5 foot length of 5/16" I.D. Blue Air/CO2 Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver.
-
Includes Ball Lock Home Brew Keg Tap Complete Set
This complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
-
Includes a 3" Diameter Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel. It comes complete with a stainless steel faucet and 5 feet of 3/16 inch I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included.
-
Continuous Cold Air Channeled Through Tower to Ensure Cold Product
- Heavy-Duty Stainless Steel Top
- Built-In Drip Tray with Drain
- Stainless Steel Interior Walls and Ceiling
- Shock Reducing Rubber Floor Mat
- Magnetic Gasket Provides Positive Door Sealing
- Self-Closing Door with Lock
- Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
- CFC-Free Foamed-in-Placed Polyurethane Insulation
- Knockout for Remote CO2 or Nitrogen Tank
- Black Finish
- ETL and ETL Sanitation Listed for Commercial Use
- Maximum Ambient Temperature: 90 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
Specifications:
| Dimensions |
| Height |
40" (Top of Guard Rail) |
| Width |
23.5" |
| Depth |
31" |
| Weight |
| Unit Weight |
143 lbs |
| Shipping Weight |
187 lbs |
| Warranty |
| Labor |
1 Year |
| Parts |
1 Year |
| Compressor (Parts Only) |
5 Years |
| Key Features |
| Built-in Capable |
No |
| Security Lock |
No |
| Keg Coupler |
Yes |
| Regulator |
Yes |
| CO2 Tank |
Yes |
| Cleaning Kit |
No |
| Outdoor Use |
No |
| Commercial Use |
Yes |
| Keg Storage Capacities |
| Full Size / 1/2-Barrel |
Holds 1 |
| Pony Size / 1/4-Barrel |
Holds 1 |
| 1/4-Barrel Slim |
Holds 2 |
| 1/6-Barrel |
Holds 3 |
| 5 gal. Ball/Pin Lock Keg |
Holds 3 |
| Exterior |
| Cabinet |
Black |
| Drip Tray |
Yes |
| Guard Rail |
Yes |
| Casters |
Yes |
| Draft Beer Tower |
| Number of Faucets |
1 |
| Material |
Chrome |
| Diameter |
3" |
| Door |
| Color / Material |
Black |
| Number of Doors |
1 |
| Door Handle |
Recessed |
| Field Reversible |
No |
| Accepts Custom Overlay Panel |
No |
| Cooling System |
| Type |
Compressor |
| Defrost System |
Automatic |
| Front Ventilation |
No |
| Controls |
| Adjustable Thermostat |
Yes |
| Digital |
Yes |
| Electrical |
| Electrical Requirements |
115V / 60HZ |
| Running Amps |
1.8A |
