We Will Work With You On Pricing! Call Or Chat With Us Today!
Description
Description
French officer and hero of the American Revolution, Lafayette was a source of inspiration for the recertification of this high-performance fireplace. Like the great general, the Valcourt team has been able to use its tactical skills to upgrade this non-catalytic unit, so that it perfectly combines the new heating technology with all its elegance.
Customize your fireplace: five faceplate louvers, as well as black or brushed nickel door overlays, are available to enhance your decor. In addition to offering a distinctive look, the appliance follows the most restrictive EPA regulations, making it the fireplace of choice for the next generation of consumers who want to use wood as a renewable and clean source of heat.
Performance Fireplaces for High Efficiency
This line offers fireplaces with eco-friendly heating with emissions below the limits imposed by EPA and the benefits of an efficient overnight burn. If needed, they can be used for ambiance with the doors open.
Lafayette II High-Efficiency Controlled Combustion Fireplace
What's Included
Blower
Fresh Air Intake Adapter
Molded Refractory Bricks
Cast Iron Andiron
Heating area :
750 - 2,200 Ft2
Maximum heat output :
80,000 BTU/h (23.4 kW)
Efficiency:
Door:
Single
Maximum recommended heating area by climate zoneSee our map
Average overall efficiency (EPA cribs / Douglas fir) :(3)
N.A. (HHV)(4)
N.A. (LHV)(5)
Average overall efficiency (dry cordwood) :(3)
68% (HHV)(4)
73% (LHV)(5)
Optimum efficiency :(6)(7)
74 %
Average particulate emissions rate :(8)
1.14 g/h
Average CO :(9)
53 g/h
(1)Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
()Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2)The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3)As measured per CSA B415.1-10 stack loss method.
(4)Higher Heating Value of the fuel.
(5)Lower Heating Value of the fuel.
(6)Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7)Optimum overall efficiency at a specific burn rate (LHV).
(8)This appliance is officially tested and certified by an independent agency.
(9)Carbon monoxyde.
General Features
Combustion technology
Non-catalytic
EPA loading volume (ft³)
1.69
High-efficiency EPA certified appliance
Yes, EPA 2020 approved
Maximum log length
20"
Log positioning
Over width
Chimney diameter
6"
Flue outlet diameter
6"
Type of chimney
CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet)
15'
Baffle type
C-Cast
Approved for a mobile home installation
No
Shipping Weight
493 lb (224 kg)
Door type
Single, glass with steel frame
Glass type
Ceramic glass
Glass surface – dimensions (Width X Height)
24 3/8" x 12 5/8"
Glass air-wash system
Yes
Premium quality blower included (CFM)
176
Overall dimension (Height)
40 5/8"
Overall dimension (Width)
36 3/4"
Overall dimension (Depth)
28 3/8"
Door opening – dimension (Height)
10 1/2"
Door opening - dimension (Width)
25 3/8"
Firebox – dimension (Height)
12 1/8"
Firebox – dimension (Width)
20 3/8"
Firebox – dimension (Depth)
12 7/8"
Moulded refractory bricks
Yes
Stainless-steel secondary-air system improving gas combustion
Yes
USA standard (emissions)
EPA
Canadian Standard (emissions)
CSA B415.1-10
USA standard (safety)
UL 127
Canadian standard (safety)
ULC-S610
Tested and listed as per applicable standards
By an accredited laboratory (CAN/USA)
Warranty
Limited lifetime
Approved Chimney Types
Manufacturiers*
Brand
Type
Diameter
American Metal
HSS
AC Triple Wall
6" (15 cm)
American Metal
HS
AC Triple Wall
6" (15 cm)
DuraVent
DuraTech
1" Solid Pack
6" (15 cm)
DuraVent
DuraTech Canada (DTC)
1" Solid Pack
6" (15 cm)
DuraVent
DuraPlus HTC
2" Solid Pack
6" (15 cm)
DuraVent
DuraTech Premium
2" Solid Pack
6" (15 cm)
DuraVent
DuraPlus
AC Triple Wall
6" (15 cm)
Metal Fab
Temp Guard
1" Solid Pack
6" (15 cm)
Olympia Chimney
Champion Chimney System
1" Solid Pack
6" (15 cm)
Olympia Chimney
Rockford Chimney Systems
1" Solid Pack
6" (15 cm)
Olympia Chimney/SBI Venting Division
Ventis
1" Solid Pack
6" (15 cm)
SBI Venting Division
Nexvent
1" Solid Pack
6" (15 cm)
Security Chimney
S-2100+
2" Solid Pack
6" (15 cm)
Selkirk
CF Sentinel (CF)
2" Solid Pack
6" (15 cm)
Selkirk
Super Pro 2100 (ALT)
2" Solid Pack
6" (15 cm)
Selkirk
Super Vent 2100 (JM)
2" Solid Pack
6" (15 cm)
* Specific components may be required depending on the chimney manufacturer.
Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm)
Canada
United-States
Clearance – top (measured from the platform on which the appliance is installed)**
80"
80"
Clearance – combustible side mantle to unit
8"
8"
Clearance – combustible side wall to unit
13"
13"
Clearance – top shelf to unit
58"
58"
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
Specifications
BTU
75,000
Heating Capacity
1,800-2,900 sq ft
Emissions
1.14 g/hr
Firebox Size
2.5 cu f
Log Length
20”
Flue Pipe Diameter
6” Class A*
Weight
405 lbs
Overall Dimensions
47 ⅛”H x 37 ⅞”W x 29 ⅝”D
Customize your product
Faceplate Louver
Classic Style Faceplate Louver
Arabesque Style Faceplate Louver
Urban Style Faceplate Louver
Mission Style Faceplate Louver
Crown Style Faceplate Louver
Door Overlay
Brushed Nickel Door Overlay
Black Door Overlay
Options and Accessories
Click to see Options and Accessories
4''Ø Fresh Air Intake Register With Airtight Damper - AC01347
60" Tavern Brown Non-Combustible Mantel - AC02782
72" Tavern Brown Non-Combustible Mantel - AC02783
60" Washed Cedar Non-Combustible Mantel - AC02780
72" Washed Cedar Non-Combustible Mantel - AC02781
Forced Air Distribution Kit 300 CFM - AC01374
Hot Air Gravity Distribution Kit - Traditional - AC01375
Fire Screen Door - AC01275
Hot Air Gravity Distribution Kit – Modern With Adjustable Pipes - AC01389K
French officer and hero of the American Revolution, Lafayette was a source of inspiration for the recertification of this high-performance fireplace. Like the great general, the Valcourt team has been able to use its tactical skills to upgrade this non-catalytic unit, so that it perfectly combines the new heating technology with all its elegance.
Customize your fireplace: five faceplate louvers, as well as black or brushed nickel door overlays, are available to enhance your decor. In addition to offering a distinctive look, the appliance follows the most restrictive EPA regulations, making it the fireplace of choice for the next generation of consumers who want to use wood as a renewable and clean source of heat.
Performance Fireplaces for High Efficiency
This line offers fireplaces with eco-friendly heating with emissions below the limits imposed by EPA and the benefits of an efficient overnight burn. If needed, they can be used for ambiance with the doors open.
Lafayette II High-Efficiency Controlled Combustion Fireplace
What's Included
Blower
Fresh Air Intake Adapter
Molded Refractory Bricks
Cast Iron Andiron
Heating area :
750 - 2,200 Ft2
Maximum heat output :
80,000 BTU/h (23.4 kW)
Efficiency:
Door:
Single
Maximum recommended heating area by climate zoneSee our map
Average overall efficiency (EPA cribs / Douglas fir) :(3)
N.A. (HHV)(4)
N.A. (LHV)(5)
Average overall efficiency (dry cordwood) :(3)
68% (HHV)(4)
73% (LHV)(5)
Optimum efficiency :(6)(7)
74 %
Average particulate emissions rate :(8)
1.14 g/h
Average CO :(9)
53 g/h
(1)Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output.
()Recommended heating area and maximum burn time may vary subject to location in home, chimney draft,heat loss factors, climate, fuel type and other variables. The recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure.
(2)The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³. Other performances are based on a fuel load prescribed by the standard. The specified loading density varies between 7 lb/ft³ and 12 lb/ft³. The moisture content is between 19% and 25%.
(3)As measured per CSA B415.1-10 stack loss method.
(4)Higher Heating Value of the fuel.
(5)Lower Heating Value of the fuel.
(6)Performances based on a fuel load prescribed by the standard at 7 lb/ft³ and with a moisture content between 19% and 25%.
(7)Optimum overall efficiency at a specific burn rate (LHV).
(8)This appliance is officially tested and certified by an independent agency.
(9)Carbon monoxyde.
General Features
Combustion technology
Non-catalytic
EPA loading volume (ft³)
1.69
High-efficiency EPA certified appliance
Yes, EPA 2020 approved
Maximum log length
20"
Log positioning
Over width
Chimney diameter
6"
Flue outlet diameter
6"
Type of chimney
CAN/ULC S629, UL 103 HT (2100 °F)
Minimum chimney height (feet)
15'
Baffle type
C-Cast
Approved for a mobile home installation
No
Shipping Weight
493 lb (224 kg)
Door type
Single, glass with steel frame
Glass type
Ceramic glass
Glass surface – dimensions (Width X Height)
24 3/8" x 12 5/8"
Glass air-wash system
Yes
Premium quality blower included (CFM)
176
Overall dimension (Height)
40 5/8"
Overall dimension (Width)
36 3/4"
Overall dimension (Depth)
28 3/8"
Door opening – dimension (Height)
10 1/2"
Door opening - dimension (Width)
25 3/8"
Firebox – dimension (Height)
12 1/8"
Firebox – dimension (Width)
20 3/8"
Firebox – dimension (Depth)
12 7/8"
Moulded refractory bricks
Yes
Stainless-steel secondary-air system improving gas combustion
Yes
USA standard (emissions)
EPA
Canadian Standard (emissions)
CSA B415.1-10
USA standard (safety)
UL 127
Canadian standard (safety)
ULC-S610
Tested and listed as per applicable standards
By an accredited laboratory (CAN/USA)
Warranty
Limited lifetime
Approved Chimney Types
Manufacturiers*
Brand
Type
Diameter
American Metal
HSS
AC Triple Wall
6" (15 cm)
American Metal
HS
AC Triple Wall
6" (15 cm)
DuraVent
DuraTech
1" Solid Pack
6" (15 cm)
DuraVent
DuraTech Canada (DTC)
1" Solid Pack
6" (15 cm)
DuraVent
DuraPlus HTC
2" Solid Pack
6" (15 cm)
DuraVent
DuraTech Premium
2" Solid Pack
6" (15 cm)
DuraVent
DuraPlus
AC Triple Wall
6" (15 cm)
Metal Fab
Temp Guard
1" Solid Pack
6" (15 cm)
Olympia Chimney
Champion Chimney System
1" Solid Pack
6" (15 cm)
Olympia Chimney
Rockford Chimney Systems
1" Solid Pack
6" (15 cm)
Olympia Chimney/SBI Venting Division
Ventis
1" Solid Pack
6" (15 cm)
SBI Venting Division
Nexvent
1" Solid Pack
6" (15 cm)
Security Chimney
S-2100+
2" Solid Pack
6" (15 cm)
Selkirk
CF Sentinel (CF)
2" Solid Pack
6" (15 cm)
Selkirk
Super Pro 2100 (ALT)
2" Solid Pack
6" (15 cm)
Selkirk
Super Vent 2100 (JM)
2" Solid Pack
6" (15 cm)
* Specific components may be required depending on the chimney manufacturer.
Minimum clearances to combustibles* (Data expressed in inches. 1 inch = 25.4 mm)
Canada
United-States
Clearance – top (measured from the platform on which the appliance is installed)**
80"
80"
Clearance – combustible side mantle to unit
8"
8"
Clearance – combustible side wall to unit
13"
13"
Clearance – top shelf to unit
58"
58"
* The information given on the certification label affixed to the appliance always overrides the information published in any other media (owner's manual, catalogues, flyers, magazines and/or web sites).
** Some appliances have been tested with a low ceiling. Before setting up your unit, refer to the installation manual.
Specifications
BTU
75,000
Heating Capacity
1,800-2,900 sq ft
Emissions
1.14 g/hr
Firebox Size
2.5 cu f
Log Length
20”
Flue Pipe Diameter
6” Class A*
Weight
405 lbs
Overall Dimensions
47 ⅛”H x 37 ⅞”W x 29 ⅝”D
Customize your product
Faceplate Louver
Classic Style Faceplate Louver
Arabesque Style Faceplate Louver
Urban Style Faceplate Louver
Mission Style Faceplate Louver
Crown Style Faceplate Louver
Door Overlay
Brushed Nickel Door Overlay
Black Door Overlay
Options and Accessories
Click to see Options and Accessories
4''Ø Fresh Air Intake Register With Airtight Damper - AC01347
60" Tavern Brown Non-Combustible Mantel - AC02782
72" Tavern Brown Non-Combustible Mantel - AC02783
60" Washed Cedar Non-Combustible Mantel - AC02780
72" Washed Cedar Non-Combustible Mantel - AC02781
Forced Air Distribution Kit 300 CFM - AC01374
Hot Air Gravity Distribution Kit - Traditional - AC01375
Fire Screen Door - AC01275
Hot Air Gravity Distribution Kit – Modern With Adjustable Pipes - AC01389K
