WineZone Air Handler 4800a Series Wine Cellar Cooling Unit
If you're looking for a high-quality wine cellar cooling unit that will keep your wine at the perfect temperature for long-term storage or aging, then you need the WineZone Air Handler 4800a Series. This powerful yet quiet unit is designed for use in cellars of all shapes and sizes, and can be easily ducted into the room for a completely invisible look. With accurate thermostat controls and the ability to add humidification or dehumidification, this unit provides total climate control for your cellar. Whether you're a professional collector or a serious hobbyist, the WineZone Air Handler 4800a Series is the ideal choice for ensuring your wine is always stored at its best.
Here are a condensed list of the Product Features:
Applications:
• Used for L-shaped rooms, long narrow rooms, or where one point source will not properly circulate air throughout the room
• For cellars that will store or mature wine for long periods of time
• Located outside the cellar, the supply and return air is ducted into the room similar to a central air conditioner
• No visible mechanical equipment in cellar
• Ducted units need only supply registers and return air grilles in the cellar leaving more wall space for racking and art work
• Ducting can be placed in soffits if room construction is already complete
• The most quiet style of all refrigeration systems
• Humidification, and dehumidification air handler systems allow for total climate control in the wine cellar
• Accurate, fast acting thermostat controls the refrigeration system and all accessories
• Can be used with either an indoor or outdoor remote condensing unit, moving heat and noise away from the cellar
• Wooden and decorative metal registers available
• Must be installed and adjusted by a qualified HVAC technician
Air Handler WZAH4800a:
• ETLC listed air handler in accordance with UL1995
• Phenolic coated, aluminum fin-copper tube evaporator coil
• Factory balanced, forward curve direct drive blower, with 115V, 3 speed, PSC motor
• Cabinet with fully insulated 3/4" fiberglass with an R value of 3.26
• 1" disposable filters standard on all units
• Vertical units have duct connections on return air inlet and a large blower access panel in front
• Horizontal units have 3/8" NC thread nuts in each corner of top panel for easy suspension and are designed for top or bottom blower access
Specifications & Assembly Manuals :
4800a BTUH Air Handler Specifications
Condenser:
| Voltage |
HP |
Ampacity Max. |
Fuse Min. |
Wire Size |
RLA/LRA |
dB |
| 230/208-60-1 |
|
8.6 |
15 |
12-2 w/Gr |
6.4/31.0 |
53 |
- Uses 5/16” x 5/8” line set up to 100 equivalent feet. Uses 5/16” x 3/4” line set from 101 to 200 equivalent feet maximum.
- 50’ of 5/16” x 5/8” line set is sent when line set is purchased with unit.
- Unit is not precharged and must be evacuated.
- For use with R-134a refrigerant.
- Indoor condensers must be installed in a room with a minimum of 3170 cubic feet of free space.
- Dimensions:
Indoor Unit: 25" x 20" x 14.5" 92 lbs.
Outdoor Unit: 27" x 20" x 20" 117 lbs.
Vertical Air Handler:
| Voltage |
HP |
Ampacity Max. |
Fuse Min. |
Wire Size |
dB |
| 115-60-1 3spd. |
1/10 |
1.2 |
15 |
14-2 w/Gr |
56 |
- Receives load voltage from condenser
- Line voltage run to condenser
- 405 CFM @ 0.08" static pressure. 8 x 12 supply trunk, 8 x 14 return trunk recommended, 2" duct wrap min.
- 3/4" FPT drain, trap required
- Dimensions:
Vertical Unit: 24" W x 13" D x 25" H 67 lbs. Filter: 8" x 19.25"
Optional Horizontal Unit: 29" W x 32.5" L x 12.5" H 102 lbs. Filter: 11.75" x 24.375"
Thermostat:
- Peco 12532 touchscreen 24 volt thermostat
- 18 gauge 8 conductor to condenser
Humidifier:
- Requires 115 volt receptacle
- 24 volt control from condenser
Dehumidification:
- Duct heater requires 240 volt 15 Amp circuit
Approximate Shipping Weight:
Crate Size:
