WineZone Air Handler 6200a Series

WineZone Air Handler 6200a Wine Cellar Air Handler

Note* These are brand new up to date units, these are not refurbished or old inventory as some competitors have. Hence the Cheaper prices, We work directly with WineZone to bring you the best products. Contact us and we will do what we can to help you with pricing.

Applications:
• Used for L-shaped rooms, long narrow rooms, or where one point source will not properly circulate air throughout the room
• For cellars that will store or mature wine for long periods of time
• Located outside the cellar, the supply and return air is ducted into the room similar to a central air conditioner
• No visible mechanical equipment in cellar
• Ducted units need only supply registers and return air grilles in the cellar leaving more wall space for racking and art work
• Ducting can be placed in soffits if room construction is already complete
• The most quiet style of all refrigeration systems
• Humidification, and dehumidification air handler systems allow for total climate control in the wine cellar
• Accurate, fast acting thermostat controls the refrigeration system and all accessories
• Can be used with either an indoor or outdoor remote condensing unit, moving heat and noise away from the cellar
• Wooden and decorative metal registers available
• Must be installed and adjusted by a qualified HVAC technician

Air Handler WZAH4800a:
• ETLC listed air handler in accordance with UL1995
• Phenolic coated, aluminum fin-copper tube evaporator coil

• Factory balanced, forward curve direct drive blower, with 115V, 3 speed, PSC motor
• Cabinet with fully insulated 3/4" fiberglass with an R value of 3.26
• 1" disposable filters standard on all units
• Vertical units have duct connections on return air inlet and a large blower access panel in front
• Horizontal units have 3/8" NC thread nuts in each corner of top panel for easy suspension and are designed for top or bottom blower access

Air Handler WZAH6200a and WZAH9000a:

• ETL listed and AHRI certified

• All-aluminum evaporator coil

• 230 volt, direct drive, multi-speed ECM blower motor
• Foil faced insulation with glue-less cabinet retention
• 1" disposable filters standard on all units
• Multi-position air handler

Indoor condenser:
• UL listed Copeland® commercial condensing unit.
• Uses R134a refrigerant
• Air cooled units standard
• Receiver for use with thermostatic expansion valve
• 4" galvanized iron base
• All units equipped with variable speed condenser fan motor speed control for quiet operation

• Crankcase heater on all models

Outdoor Condenser:
• UL listed Copeland® commercial condensing unit.
• Uses R134a refrigerant
• Air cooled units standard
• Receiver for use with thermostatic expansion valve
• Rainproof control panel box with liquid tight conduit on control panel
• All units equipped with variable speed condenser fan motor speed control for quiet operation and low ambient control
• Crankcase heater on all models

Outdoor Enclosure:
• UL Listed enclosure
• Galvanized steel base
• 20 GA. Galvanized steel cabinet
• Hinged access for easier servicing
• Wind safety latch
• All season weather protection

• Front louvers at 45° angle
• Rain trough under hinge to catch moisture that might seep through hinge

• Condenser screen protected with high temperature baked-on clear lacquer coating

Peco Performance PRO Thermostat
The Performance PROT12000 Series is intended for use in residential and commercial environments. It can support the 1 stage Heat/1 stage Cool/Humidify/Dehumidify configurations for WineZone air handler systems. It features a 12 square inch blue backlit display with dynamic menus, accessed using touchscreen keys. All Performance Pro T12000 Series offer the following standard features: Auto-changeover, temporary override, optional remote temperature sensors, keypad lockout, and filter change reminder.

Advantages:
• One thermostat controls Cool, Humidify, Dehumidify, and Heat
• Blue touchscreen is large, easy to read, and user friendly.
• System configuration, while extensive, is easy and fast to perform.
• The wiring connections use common designations familiar to HVAC techs making installation of control wiring faster and simpler.
• No 115-volt power circuit is required at the thermostat reducing installation cost
• Humidify and Dehumidify are more economical since there is no need for additional controls
• Remote temperature sensor allows user to view the temperature from outside the cellar.
• Customers that purchase Dehumidification also receive the ability to heat the cellar. The Heat option with the modified condenser control panel is no longer necessary
• Provides control of Fan to customer.
• Can be used as a direct replacement for WZDS thermostats


Humidification:
Research Products Corporation is the largest manufacturer of whole house humidifiers, air cleaners, and fresh air exchangers and is a recognized leader in the heating and air conditioning industry.
• Quiet, efficient performance
• Easily installed and maintained
• Fan draws air through water panel where humidity is generated and the air handler distributes humidity throughout the cellar
• .75 gal/hr capacity, among the highest of all evaporative humidifiers
• Could humidify a 4000 sq. ft. home
• Simple yearly maintenance can be done by the HVAC tech while performing the yearly maintenance on the refrigeration system

• Fast, easy replacement of inexpensive water panel and orifice

Dehumidification for WZAH4800a:
• Duct heater suitable use in any forced air system
• Suitable for zero clearance installations in vertical or horizontal duct systems
• Easily installed in the side of the supply air duct
• Heavy gauge galvanized iron construction
• Output matched in size to refrigeration unit

Dehumidification for WZAH6200a and WZAH9000a:
• Cabinet installed electric heater kit
• Factory installed if purchased with the unit
• Rust-resistant nickel chromium for the MBVC's heat elements, improving the unit's longevity and performance.
• Features a plug-in wiring harness

Specifications & Assembly Manuals :

Condenser:

• Uses 5/16” x 3/4” line set up to 150 equivalent feet. Uses 3/8” x 7/8” line set from 151 to 200 equivalent feet maximum.
• 50’ of 5/16” x 3/4” line set is sent when line set is purchased with the unit.
• Unit is not precharged and must be evacuated.
• For use with R-134a refrigerant.
• Indoor condensers must be installed in a room with a minimum of 4440 cubic feet of free space.
• Dimensions:
  Indoor Unit: 25"L x 20"W x 18.5"T 100 lbs.
  Outdoor Unit: 25.5"L x 20"W x 20"T 126 lbs.

Multi-Position Air Handler:

• Multi positon unit.
• Requires dedicated circuit from fuse panel. Ampacity, max. fuse, and wire size will change if dehumidification is used. See dehumidification below.
• 600 CFM required. 8 x 16 supply trunk, 8 x 18 return trunk recommended, 2” duct wrap min.
• 3/4” FPT drain, trap required.
• Dimensions:
  Unit: 17.5" W x 21" D x 45" H
  Supply Opening: 11.25" x 16.375"

Thermostat:

• Peco 12532 touchscreen 24 volt thermostat
• 18 gauge 8 conductor to condenser

Humidifier:

• Requires 115 volt receptacle
• 24 volt control from condenser

Dehumidification:

• To be installed in air handler
• 25 amp breaker required at air handler for 240 volt use, 20 amp breaker required at air handler for 208 volt use
• Heater draws 12.5 amps at 240 volts, 10.8 amps at 208 volts

Approximate Shipping Weight:

• 360-430 lbs.

Crate Size: 32" x 72" x 40" T